HSDJETS Super Viper Pro Foam Turbine Navy Marine (Turbine ARF TURBINE SOLD SEPARATELY)

Availability: Out of stock
SKU: A15020200


Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight 6.5kg (14.3 lb) w/ 1350ml fuel
Turbine Engine SW60 6KG brushed / SW60B 6KG brushless
UBEC 6A (2P Du-Pont and JR connector)
Cruising speed 250 km/h
Flying time 5 mins (full throttle)
Wing area 34.28 dm2
Wing load 189.6 g/dm2
Painting surface treatment Low gloss

25g×2 Metal gear with 480mm lead (left & right ailerons)
25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1)
25g×2 Metal gear with 80mm lead (elevator)
12g×1 Metal gear with 300mm lead (Nose wheel steering)
12g×1 Metal gear (360°lock Hatch cover)

CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Radio System 7 channel (required & not included)
Turbine Engine Battery 3S 11.1V 2000mAh LiPo with XT60 type connector(required & not included)
Receiver Charger 2S 7.4V 2000mAh LiPo with T type connector(required & not included)
Battery Charger LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps Yes
Lights Yes
The smoke system Yes
Hinge Type Metal hinges
Material EPO foam
Skill Level Senior
Build Time 1~2 hours


  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Main wing carbon tube L=598mm external diameter 16mm×1
  • Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
  • Sticker×1
  • Capping board×1

  • Accessories Bag 1 ×1
    • Nylon rocker arm of the servo ×2
    • Double sided sponge paper×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×10mm)×4 (Tail nozzle)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)

  • Accessories Bag 2 ×1
    • L type 3mm inner six corner board hand×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)

  • Manual×1

  • 7 channel radio system
  • 3S 11.1V 2000mAh LiPo with XT60 type connector
  • 2S 7.4V 2000mAh LiPo with T type connector
  • LiPo battery charger
  • Turbine engine
Write your own review
  • Bad
  • Excellent