HSDJETS Super Viper Pro Foam Turbine Blue (Turbine ARF TURBINE TURBINE SOLD SEPARATELY)

We anticipate the next available in stock date to be July 2018. This delay is due to the shortage of raw manufacturing materials. We apologize!
Brand: HSDJETS
Availability: Out of stock
SKU: A15050200
$3,249.90
$1,299.90

SPECIFICATIONS:

Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight 6.5kg (14.3 lb) w/ 1350ml fuel
Turbine Engine SW60 6KG brushed / SW60B 6KG brushless
UBEC 6A (2P Du-Pont and JR connector)
Cruising speed 250 km/h
Flying time 5 mins (full throttle)
Wing area 34.28 dm2
Wing load 189.6 g/dm2
Painting surface treatment Low gloss
Servos

25g×2 Metal gear with 480mm lead (left & right ailerons)
25g×3 Metal gear with 190mm lead (Flap×2 & rudder×1)
25g×2 Metal gear with 80mm lead (elevator)
12g×1 Metal gear with 300mm lead (Nose wheel steering)
12g×1 Metal gear (360°lock Hatch cover)

CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Radio System 7 channel (required & not included)
Turbine Engine Battery 3S 11.1V 2000mAh LiPo with XT60 type connector(required & not included)
Receiver Charger 2S 7.4V 2000mAh LiPo with T type connector(required & not included)
Battery Charger LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps Yes
Lights Yes
The smoke system Yes
Hinge Type Metal hinges
Material EPO foam
Skill Level Senior
Build Time 1~2 hours




PACKAGE INCLUDES:

  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Main wing carbon tube L=598mm external diameter 16mm×1
  • Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
  • Sticker×1
  • Capping board×1

  • Accessories Bag 1 ×1
    • Nylon rocker arm of the servo ×2
    • Double sided sponge paper×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×10mm)×4 (Tail nozzle)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)

  • Accessories Bag 2 ×1
    • L type 3mm inner six corner board hand×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)

  • Manual×1


REQUIRES:
  • 7 channel radio system
  • 3S 11.1V 2000mAh LiPo with XT60 type connector
  • 2S 7.4V 2000mAh LiPo with T type connector
  • LiPo battery charger
  • Turbine engine
Write your own review
*
*
  • Bad
  • Excellent