HSDJETS Super Viper ECO C Foam Turbine Blue KIT

Brand: HSDJETS
Availability: Out of stock
SKU: A15040300
$637.90
$449.90

SPECIFICATIONS:

Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Weight 2.2kg (4.8 lb)
UBEC 8A/8A (XT60 connector) or 6A (2P Du-Pont and JR connector)(required & not included)
Wing area 34.28 dm2
Wing load 189.6 g/dm2
Painting surface treatment Low gloss
CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3(required & not included)
Radio System 6+ channel (required & not included)
Turbine Engine Battery 3S 11.1V 2000mAh LiPo with XT60 type connector(required & not included)
Receiver Battery 2S 7.4V 2000mAh LiPo with T type connector(required & not included)
Battery Charger LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps Yes
Lights No
The smoke system No
Hinge Type Metal hinges
Material EPO foam
Skill Level Senior
Build Time 2~3 hours




PACKAGE INCLUDES:

  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Main wing carbon tube L=598mm external diameter 16mm×1
  • Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
  • Sticker×1
  • Capping board×1

  • Accessories Bag 1 ×1
    • Pull rod (1.8×91mm)×2(Put the ball head and the ball head, the aileron steel wire)
    • Pull rod (1.8×80mm)×2(Put the ball head and the ball head, the flap steel wire)
    • Pull rod (1.8×65mm)×2(Put the ball head and the ball head, the Horizontal Stabilizer/Vertical Stabilizer steel wire)
    • Pull rod (1.8×31mm)×1(Load the ball head, the front landing gear and the steel wire)
    • Pull rod (1.8×12mm)×1(Load the ball head, the nose landing gear and the steel wire)
    • Screw (PA4×30mm)×8 (Landing gear)
    • Screw (PWA2×8mm)×2 (Nose plate servo fixed)
    • Screw (PB2.5×8mm)×8 (Fixed wing line)
    • Screw (PM2×10mm)×14 (Lock the self locking nut and fix the head of the rod)
    • Left lamp cover×1
    • Right lamp cover×1

  • Accessories Bag 2 ×1
    • Tinfoil (50×360mm)×5
    • Nylon cable ties×5
    • Magic tape cable ties×1
    • Nylon cockpit buckle×1
    • Metal clasp of engine cover×1

  • Accessories Bag 3 ×1
    • Screw (HM3×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (HA3×14mm)×4 (Engine)
    • Screw (HA3×10mm)×4 (Tail nozzle)
    • Screw (HA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)

  • Accessories Bag 4 ×1
    • L type 3mm inner six corner board hand×1
    • Screw (HM3×35mm)×4 (Nose Spare)
    • Screw (HM3×14mm)×2 (Wing Spare)
    • Screw (HM3×10mm)×2 (Wing Spare)
    • Screw (HA3×14mm)×4 (Engine Spare)
    • Screw (HA3×10mm)×4 (Tail nozzle Spare)
    • Screw (HA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer Spare)
    • 3M double-sided adhesive×1

  • Manual×1


REQUIRES:
  • 6+ channel radio system(radio & receiver)
  • 2S 7.4V 2000mAh LiPo with T type connector(UBEC)
  • 3S 11.1V 2000mAh LiPo with XT60 type connector(Turbine Engine)
  • LiPo battery charger
  • Landing gear
  • UBEC
  • Servos
  • Turbine Engine
  • General landing gear control system
  • Integrated mix-control system
  • All wire
  • Tail nozzle
  • Tank
Write your own review
*
*
  • Bad
  • Excellent