HSDJETS Mirage 2000 Foam Turbine Blue Camo ARF (TURBINE SOLD SEPARATELY)

Brand: HSDJETS
Availability: In stock
SKU: A17020200
$3,249.90
$1,399.90

SPECIFICATIONS:

Wingspan 1225mm (48.2in)
Length 1959mm (77.1in)
Flying Weight 7.5kg (16.5 lb) w/ 1350ml fuel
Turbine Engine SW60 6KG brushed / SW60B 6KG brushless
UBEC 8A/8A (XT60 connector)
Cruising speed 250 km/h
Flying time 5 mins (full throttle)
Painting surface treatment Low gloss
Servos

40g×2 Metal gear with 180mm lead (Left & right ailerons)
25g×1 Metal gear with 150mm lead (Rudder)
12g×1 Metal gear with 300mm lead (Nose wheel steering)
12g×1 Metal gear (360°lock nose Cover plate servo)
12g×1 Metal gear (360°lock left Cover plate servo)
12g×1 Metal gear rev (360°lock right Cover plate servo)

CG (Center of Gravity) 335mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Radio System 7 channel (required & not included)
Turbine Engine Battery 3S 11.1V 2200mAh LiPo with XT60 type connector(required & not included)
Receiver Charger 3S 11.1V 2200mAh LiPo with XT60 type connector(required & not included)
Battery Charger LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights Yes
The smoke system Yes
Hinge Type Metal hinges
Material EPO foam
Skill Level Senior
Build Time 1~2 hours




PACKAGE INCLUDES:

  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Main wing carbon tube L=630mm external diameter=16mm×1

  • Accessories Bag 1 ×1
    • Left fuselage fin×1
    • Right fuselage fin×1
    • Left Vertical Stabilizer fin×1
    • Right Vertical Stabilizer fin×1
    • Air refueling tube×1
    • Nose antenna×1
    • Lower fuselage antenna(front)×1
    • Lower fuselage antenna(back)×1
    • Upper fuselage antenna×1
    • Left fuselage tube×1
    • Right fuselage tube×1

  • Accessories Bag 2 ×1
    • L type six angle wrench in M3×1
    • Screw (HM4×45mm)×1 (Nose)
    • Screw (HM3×10mm)×4 (Wing)
    • Screw (HA3×14mm)×4 (Engine)
    • Screw (HA3×10mm)×4 (Tail nozzle Vertical Stabilizer)

  • Accessories Bag 3 ×1
    • Screw (HM4×45mm)×1 (Nose spare)
    • Screw (HM3×10mm)×4 (Wing spare)
    • Screw (HA3×14mm)×4 (Engine spare)
    • Screw (HA3×10mm)×8 (Tail nozzle Vertical Stabilizer spare)
    • Double sided sponge paper×1
  • Manual×1

REQUIRES:
  • 7 channel radio system
  • 2x 3S 11.1V 2200mAh LiPo with XT60 type connector
  • LiPo battery charger
  • Turbine engine
Write your own review
*
*
  • Bad
  • Excellent
Customers who bought this item also bought