HSDJETS J-F16 Foam Turbine Black Camo KIT

This is a KIT Only. No Electronics, No Wiring and No Retract are included.
Brand: HSDJETS
Availability: In stock
SKU: A16020300
$675.90
$469.90

SPECIFICATIONS:

Wingspan 1245mm (49in)
Length 1809mm (71.2in)
Weight 2.2kg (4.8 lb)
UBEC 8A/8A (XT60 connector) or 6A (2P Du-Pont and JR connector)(required & not included)
Painting surface treatment Low gloss
CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×2(required & not included)
Radio System 6+ channel (required & not included)
Turbine Engine Battery 3S 11.1V 1500~2000 mAh LiPo with XT60 type connector(required & not included)
Receiver Battery 3S 11.1V 1500~2000 mAh LiPo with XT60 type connector(required & not included)
Battery Charger LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights No
The smoke system No
Hinge Type Metal hinges
Material EPO foam
Skill Level Senior
Build Time 2~3 hours




PACKAGE INCLUDES:

  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Left missile×1
  • Right missile×1
  • Left tail fin×1
  • Right tail fin×1
  • Main wing carbon tube L=320mm diameter=10mm×2
  • White Sticker×1

  • Accessories Bag 1 ×1
    • Horizontal steel wire rod(3×88mm)×2 (Horizontal Stabilizer)
    • Aileron steel wire rod(1.8×88mm)×2 (Aileron)
    • Wing lampshade×2
    • Fuselage lampshade×6
    • Vertical Stabilizer lampshade×2
    • Nylon cable ties×5
    • Screw (PWA2×8mm)×8 (Control box)
    • Steering steel wire(1.5×35mm)×1 (Nose landing gear)
    • Wire rod steel wire(1.8×60mm)×1 (Vertical Stabilizer)
    • Wire rod steel wire(1.7×65mm)×1 (Nose wheel locking servo)
    • Wire rod steel wire(1.7×65mm)×1 (Left wheel locking servo)
    • Wire rod steel wire(1.2×41mm)×2 (Main wheel Cover)
    • Wire rod steel wire(1.2×41mm)×1 (Nose wheel Cover)
    • Screw (PM2.5×6mm)×1 (Main wheel Cover)
    • Screw (PM2.5×10mm)×1 (Main wheel Cover)
    • Wire rod steel wire(1.7×80mm)×1 (Right wheel locking servo)
    • Screw (PM3×12mm)×4 (Horizontal Stabilizer rod fixation with self-locking nut)
    • Screw (PM2×10mm)×6 (Wing/vertical Stabilizer rod fixation with self-locking nut)

  • Accessories Bag 2 ×1
    • Screw (HM3×6mm)×2 (Horizontal Stabilizer)
    • Screw (HA3×10mm)×4 (Tail nozzle)
    • Screw (HM3×10mm)×4 (Wing)
    • Screw (HA3×8mm)×4 (Vertical Stabilizer)
    • Screw (HA3×14mm)×5 (Nose 1,Engine 4)

  • Accessories Bag 3 ×1
    • Screw (HM3×10mm)×4 (Wing Spare)
    • Screw (HA3×14mm)×5 (Nose 1,Engine 4 Spare)
    • Screw (HA3×8mm)×4 (Vertical Stabilizer Spare)
    • Screw (HA3×10mm)×4 (Tail nozzle Spare)

  • Accessories Bag 4 ×1
    • Nylon rocker arm of the servo ×2 (Spare)
    • Nylon antenna×1
    • Nylon airspeed tube×1
  • Manual×1


REQUIRES:
  • 6+ channel radio system(radio & receiver)
  • 3S 11.1V 1500~2000 mAh LiPo with XT60 type connector
  • LiPo battery charger
  • Landing gear
  • UBEC
  • Servos
  • Turbine Engine
  • General landing gear control system
  • Integrated mix-control system
  • All wire
  • Tail nozzle
  • Tank

Write your own review
*
*
  • Bad
  • Excellent
Customers who bought this item also bought

HSDJETS GYRO V2

HSDJETS GYRO V2 + 60 Core BLREWH L-100mm JR male×5 + 60 Core BLREWH L-100mm JR High elf connector×1 + Bolt driver ×1 + 3M adhesive tape
$35.90 $25.95

HSDJETS Turbine / 105mm EDF F16 White Light on Top Vertical Stab

10×23mm, 1W High Power White light, Single side Welded
$2.90