HSDJETS 800mm D-T28 A Orange PNP

Availability: Out of stock
SKU: A23010200


Wingspan 800mm (31.5in)
Length 670mm (26.4in)
Weight 395g / 13.93oz (w/ battery)
305g / 10.76oz (w/o battery)
Power System 2212-900KV brushless outrunner motor
Electronic Speed Control 20A (T type connector)
Propeller 8×6 3-Blade

9g×2 nylon gear with 300mm lead (left & right ailerons)
9g×2 nylon gear with 100mm lead (elevator & rudder)
9g×1 nylon gear with 210mm lead Rev (Nose wheel steering)

CG (Center of Gravity) 100mm from the leading edge of the Main Wing
Landing Gears Nylon fixed landing gear×3
Radio System 4 channel (required & not included)
Battery 3S 11.1V 1000mAh 20C LiPo with T type connector (required & not included)
Battery Charger 3S LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights No
Hinge Type Nylon hinges
Material EPO foam
Skill Level Primary
Build Time 1~2 hours


  • Fuselage×1
  • Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Propeller(3-Blade)×1
  • Stainless steel tie rod L1=280mm L2=315mm (w/ Nylon hinges)×2
  • Accessories Bag
    • Nylon landing gear×3
    • Spinner×1
    • Stainless steel tie rod L=30mm (w/ Nylon hinges)×2
    • L type inner six corner board hand×1
    • Velcro×2
    • Screw (PA2.5×30mm)×4 (wing)
    • Screw (PA1.7×18mm)×2 (Vertical Stabilizer rudder angle)
    • Screw (PA2.5×12mm)×4 (wing rudder angle)
    • Screw (PA1.7×10mm)×7 (wing rudder angle)
    • Nylon hinges×2
    • Nylon rudder angle×4
    • Nylon Tablet×4
  • Manual×1
  • 4 channel radio system(radio & receiver)
  • 3S 11.1V 1000mAh 20C LiPo with T type connector
  • 3S LiPo battery charger

Product reviews for HSDJETS 800mm D-T28 A Orange PNP

Write your own review
  • Bad
  • Excellent