HSDJETS 800mm D-F4U A Blue PNP

Availability: Out of stock
SKU: A24010200


Wingspan 800mm (31.5in)
Length 640mm (25.2in)
Weight 395g / 13.93oz (w/ battery)
305g / 10.76oz (w/o battery)
Power System 2212-900KV brushless outrunner motor
Electronic Speed Control 20A (T type connector)
Propeller 8×6 4-Blade

9g×2 nylon gear with 300mm lead (left & right ailerons)
9g×2 nylon gear with 100mm lead (elevator & rudder)

CG (Center of Gravity) 55mm from the leading edge of the Main Wing
Landing Gears Nylon fixed landing gear×2
Radio System 4 channel (required & not included)
Battery 3S 11.1V 1000mAh 20C LiPo with T type connector (required & not included)
Battery Charger 3S LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights No
Hinge Type Nylon hinges
Material EPO foam
Skill Level primary
Build Time 1~2 hours


  • Fuselage×1
  • Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Big Missile×2
  • Small Missile×8
  • Propeller(4-Blade)×1
  • Stainless steel tie rod L1=230mm L2=280mm (w/ Nylon hinges)×2
  • Accessories Bag×1
    • Nylon landing gear×2
    • Stainless steel tie rod L=40mm (w/ Nylon hinges)×2
    • Spinner×1
    • Nylon antenna post×1
    • L type inner six corner board hand×1
    • Velcro×2
    • Screw (PA2.5×25mm)×4 (wing×2,Spare×2)
    • Screw (PA1.7×12mm)×4 (Vertical Stabilizer rudder angle×2,Spare×2)
    • Screw (PA1.7×10mm)×12 (Ailerons rudder angle×8,Spare×4)
    • Nylon hinges×2
    • Nylon rudder angle×3
    • Nylon Tablet×3
  • Manual×1

  • 4 channel radio system(radio & receiver)
  • 3S 11.1V 1000mAh 20C LiPo with T type connector
  • 3S LiPo battery charger

Product reviews for HSDJETS 800mm D-F4U A Blue PNP

Write your own review
  • Bad
  • Excellent