HSDJETS 64mm EDF D-F22 A Silver Camo PNP

Availability: Out of stock
SKU: A09010200


Wingspan 635mm (25in)
Length 850mm (33.5in)
Flying Weight 580g (20.5 oz) w/ 3S battery
EDF diameter 64mm 5-blade
Power System 3S 2601-4100KV brushless Outrunner Motor
Electronic Speed Control 30A T plug
Cruising speed 120 km/h
Flying time 3 mins (full throttle)
Painting surface treatment Low gloss

9g×2 metal gear with 55mm lead (Ailerons & elevator)
9g×1 metal gear with 160mm lead (Nose wheel steering)

CG (Center of Gravity) 120mm from the leading edge of the Main Wing
Landing Gears Fixed steel wire landing gear ×3
Radio System 4 channel (required & not included)
Battery 3S 11.1V 1300mAh 20C LiPo with T type connector(required & not included)
Battery Charger 3S LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder No
Flaps No
Lights No
Hinge Type Nylon hinges
Material EPO foam
Skill Level Beginner
Build Time 1~2 hours


  • Fuselage ×1
  • Nose ×1
  • Left Wing ×1
  • Right Wing ×1
  • Left Horizontal Stabilizer ×1
  • Right Horizontal Stabilizer ×1
  • Left Vertical Stabilizer ×1
  • RightVertical Stabilizer ×1
  • Auxiliary oil tank ×2
  • Landing gear Bag 1
    • Landing gear ×3
    • Screw (PA2.5×20mm)×4 (Landing gear)
    • Screw (PA2.5×10mm)×4 (Landing gear)
    • Plastic film ×4 (Landing gear)
  • Accessories Bag 2
    • Nylon rudder angle ×4(Metal Thimble)
    • Nylon Rudder angle gasket ×4
    • Screw (PB1.7×10mm) ×16 (Rudder angle)
    • Screw (PB2×10mm) ×4 (Auxiliary oil tank)
    • Plastic film ×4(Big ×2, Small ×2, Auxiliary oil tank)
    • Bar steel wire(1.2×225mm) ×2
  • Manual×1

  • 4+ channel radio system(radio & receiver)
  • 3S 11.1V 1300mAh 20C LiPo with T type connector
  • 3S LiPo battery charger
Write your own review
  • Bad
  • Excellent
Customers who bought this item also bought