HSDJETS 105mm EDF Super Viper V4 Navy Marine PNP 12S With Electromagnetic Brake

We anticipate the next available in stock date to be Oct 2018. This delay is due to the shortage of raw manufacturing materials. We apologize!

Availability: Out of stock
SKU: A01070204B


Wingspan 1500mm (59.1in)
Length 1663mm (65.5in)
Flying Weight 5kg (11 lb)
Motor 4258-700KV brushless out runner
EDF 105mm,12 Blades
Cruising speed 180 km/h
Flying time 4 mins (full throttle)
Wing area 34.28 dm2
Wing load 145.9 g/dm2
Painting surface treatment Low gloss

12g×2 Metal gear with 480mm lead (left & right ailerons)
12g×3 Metal gear with 190mm lead (Flap×2 & rudder×1)
12g×2 Metal gear with 80mm lead (elevator)
12g×1 Metal gear with 300mm lead (Nose wheel steering)
12g×1 Metal gear (360°lock Hatch cover)

CG (Center of Gravity) 170mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear×3
Radio System 6 channel (required & not included)
Power Battery 12S 44.4V 5000mAh LiPo with AS150 connector(required & not included)
Receiver Battery 2S 7.4V 1800~2200 mAh LiPo (required & not included)
Battery Charger 2S~6S×2 LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps Yes
Lights Yes
Electromagnetic Brake Yes
Hinge Type Metal hinges
Material EPO foam
Skill Level Senior
Build Time 1 hours


  • Fuselage×1
  • Left Wing×1
  • Right Wing×1
  • Left Horizontal Stabilizer×1
  • Right Horizontal Stabilizer×1
  • Vertical Stabilizer×1
  • Nose×1
  • Cockpit canopy×1
  • Main wing carbon tube L=598mm external diameter 16mm×1
  • Horizontal Stabilizer carbon tube L=500mm external diameter 6mm×1
  • Sticker×1
  • Capping board×1
  • Accessories Bag 1 ×1
    • Nylon rocker arm of the servo ×2
    • Double sided sponge paper×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×10mm)×4 (Tail nozzle)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
  • Accessories Bag 2 ×1
    • L type 3mm inner six corner board hand×1
    • Screw (HM4×35mm)×4 (Nose)
    • Screw (HM3×14mm)×2 (Wing)
    • Screw (HM3×10mm)×2 (Wing)
    • Screw (PA3×14mm)×4 (Engine)
    • Screw (PA3×8mm)×8 (Horizontal Stabilizer/Vertical Stabilizer)
  • Manual×1

  • 6 channel radio system(radio & receiver) (required & not included)
  • 12S 44.4V 5000mAh LiPo with AS150 connector (required & not included)
  • 2S 7.4V 1800~2200 mAh LiPo (required & not included)
  • 2S~6S×2 LiPo battery charger (required & not included)
Write your own review
  • Bad
  • Excellent