Wingspan |
956mm (37.6in) |
Length |
1668mm (65.7in) |
Flying Weight |
6S: 4.5kg (9.9 lb), 8S: 4.9kg (10.8 lb) |
Wing area |
26.5 dm2 |
Wing load |
6S: 169.8 g/dm2, 8S: 184.9 g/dm2 |
EDF diameter |
105mm 12-blade |
Power System |
6S: 4258-1200KV, 8S: 4258-1000KV brushless Outrunner Motor |
Electronic Speed Control |
160A |
UBEC |
6A |
Cruising speed |
180 km/h |
Flying time |
4 mins (full throttle) |
Painting surface treatment |
Low gloss |
Servos |
12g ×1 Metal gear with 300mm lead rev (Left ailerons) 12g ×1 Metal gear with 300mm lead (Right ailerons) 12g ×1 Metal gear with 400mm lead (Rudder) 12g ×1 Metal gear with 400mm lead rev (Nose wheel steering) 25g ×1 Metal gear with 190mm lead rev (Canard) 12g ×1 Metal gear (Nose door servo) 12g ×1 Metal gear (left door servo) 12g ×1 Metal gear (Right door servo)
|
CG (Center of Gravity) |
140mm from the leading edge of the Main Wing |
Landing Gears |
Metal electric retractable hydraulic landing gear ×3 |
Radio System |
8 channel (required & not included) |
Power Battery |
6S: 22.2V, 8S: 29.6V 5000mAh LiPo with AS150 type connector(required & not included) |
Receiver Battery |
2S 7.4V 1800~2200mAh LiPo with 2P Du-Pont type connector(required & not included) |
Battery Charger |
6S/8S LiPo battery charger (required & not included) |
Ailerons |
Yes |
Elevator |
Yes |
Rudder |
Yes |
Flaps |
No |
Candrd |
Yes |
Lights |
Yes |
Hinge Type |
Nylon hinges |
Material |
EPO foam |
Skill Level |
Intermediate |
Build Time |
1~2 hours |