HSDJETS 105mm EDF J-10 Blue PNP 6S or 8S

Brand: HSDJETS
Availability: In stock
SKU: A02010202Y
*
$864.90
$599.90

SPECIFICATIONS:

Wingspan 956mm (37.6in)
Length 1668mm (65.7in)
Flying Weight 6S: 4.5kg (9.9 lb), 8S: 4.9kg (10.8 lb)
Wing area 26.5 dm2
Wing load 6S: 169.8 g/dm2,  8S: 184.9 g/dm2
EDF diameter 105mm 12-blade
Power System 6S: 4258-1200KV,  8S: 4258-1000KV brushless Outrunner Motor
Electronic Speed Control 160A
UBEC 6A
Cruising speed 180 km/h
Flying time 4 mins (full throttle)
Painting surface treatment Low gloss
Servos

12g ×1 Metal gear with 300mm lead rev (Left ailerons)
12g ×1 Metal gear with 300mm lead (Right ailerons)
12g ×1 Metal gear with 400mm lead (Rudder)
12g ×1 Metal gear with 400mm lead rev (Nose wheel steering)
25g ×1 Metal gear with 190mm lead rev (Canard)
12g ×1 Metal gear (Nose door servo)
12g ×1 Metal gear (left door servo)
12g ×1 Metal gear (Right door servo)

CG (Center of Gravity) 140mm from the leading edge of the Main Wing
Landing Gears Metal electric retractable hydraulic landing gear ×3
Radio System 8 channel (required & not included)
Power Battery 6S: 22.2V, 8S: 29.6V 5000mAh LiPo with AS150 type connector(required & not included)
Receiver Battery 2S 7.4V 1800~2200mAh LiPo with 2P Du-Pont type connector(required & not included)
Battery Charger 6S/8S LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Candrd Yes
Lights Yes
Hinge Type Nylon hinges
Material EPO foam
Skill Level Intermediate
Build Time 1~2 hours



PACKAGE INCLUDES:

  • Fuselage ×1
  • Nose cone ×1
  • Left Wing ×1
  • Right Wing ×1
  • Vertical Stabilizer ×1
  • Left canard ×1
  • Right canard ×1
  • Tail fin ×1
  • Tail nozzle ×1
  • Main wing carbon tube L=355mm diameter=10mm ×1
  • Sticker ×1
  • Accessories Bag 1 ×1
    • Screw (PA3×10mm)×4 (Wing)
    • Screw (PWA3×8mm)×4 (Vertical Stabilizer)
  • Accessories Bag 2 ×1
    • Nylon airspeed tube ×1
    • Nylon left fuselage airspeed tub ×1
    • Nylon right fuselage airspeed tub ×1
    • Nylon airspeed tube under the fuselage ×1
    • Nylon antenna under the fuselage ×1
    • Nylon antenna on the fuselage ×1
  • Accessories Bag 3 ×1
    • Nylon rudder angle ×2
    • Nylon rudder angle gasket ×2
    • Screw (PA2×8mm) ×2(Rudder angle)
    • Ball head buckle ×2
    • Servo long rocker arm(9 hole) ×1
    • Nylon Chuck(Metal Thimble) ×2
  • Accessories Bag 4 ×1
    • Nylon Refueling pipe×1
  • Manual×1


REQUIRES:
  • 8 channel radio system(radio & receiver)
  • 6S: 22.2V, 8S: 29.6V 5000mAh LiPo with AS150 type connector
  • 2S 7.4V 1800~2200mAh LiPo with 2PDu-Pont type connector
  • 6S/8S LiPo battery charger
Existing reviews
8S J10
Comes with everything installed and wired including the gyro!  Fantastic value!  Very easy to fly.  The gyro works well and is very easy to setup due to the easy to follow, color, instructions.  I went from box to ready to fly in less than 45 minutes.
Andy | 12/29/2017 6:12 PM
Was this review helpful? Yes No (0/0)
Write your own review
*
*
  • Bad
  • Excellent