AIR EPIC MODEL 1500mm Glider B Red PNP

Availability: In stock
SKU: A31020200
$107.90
$79.90

SPECIFICATIONS:

Wingspan 1500mm (59)
Length 925mm (36.4in)
Weight 650g / 22.9oz (w/ battery)
Power System D2010-1860KV brushless outrunner motor
Electronic Speed Control 20A (T type connector)
Propeller 5×5E 2-Blade
Servos

9g×2 nylon gear with 300mm lead (left & right ailerons)
9g×2 nylon gear with 180mm lead(elevator & rudder)

CG (Center of Gravity) 71mm from the leading edge of the Main Wing
Landing Gears No
Radio System 4 channel (required & not included)
Battery 3S 11.1V 1300mAh 20C LiPo with T type connector (required & not included)
Battery Charger 3S LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights No
Hinge Type Nylon hinges
Material EPO foam
Skill Level Beginner
Build Time 1 hours



PACKAGE INCLUDES:

  • Fuselage ×1
  • Left wing ×1
  • Right wing ×1
  • Horizontal Stabilizer ×1
  • Vertical Stabilizer ×1
  • Cockpit cover ×1
  • Fuselage pin carbon tube L=300mm diameter=6mm ×1
  • Propeller ×1
  • Magic sticker ×1
  • Y line ×1
  • Accessories Bag 1
    • Wire rod steel wire(1.20×55mm) ×2(loaded chuck)
    • Screw (PM2.5×70mm)×2 (wing)
  • Accessories Bag 2
    • Nylon rudder angle ×4
    • Nylon rudder angle gasket ×4
    • Nylon Chuck ×2
    • Screw (PB1.7×10mm)×8 (rudder angle)
  • Manual×1


REQUIRES:
  • 4+ channel radio system(4CH radio & 6CH receiver)
  • 3S 11.1V 1300mAh 20C LiPo with T type connector
  • 3S LiPo battery charger

SPECIFICATIONS:

Wingspan 1500mm (59)
Length 925mm (36.4in)
Weight 650g / 22.9oz (w/ battery)
Power System D2010-1860KV brushless outrunner motor
Electronic Speed Control 20A (T type connector)
Propeller 5×5E 2-Blade
Servos

9g×2 nylon gear with 300mm lead (left & right ailerons)
9g×2 nylon gear with 180mm lead(elevator & rudder)

CG (Center of Gravity) 71mm from the leading edge of the Main Wing
Landing Gears No
Radio System 4 channel (required & not included)
Battery 3S 11.1V 1300mAh 20C LiPo with T type connector (required & not included)
Battery Charger 3S LiPo battery charger (required & not included)
Ailerons Yes
Elevator Yes
Rudder Yes
Flaps No
Lights No
Hinge Type Nylon hinges
Material EPO foam
Skill Level Beginner
Build Time 1 hours



PACKAGE INCLUDES:

  • Fuselage ×1
  • Left wing ×1
  • Right wing ×1
  • Horizontal Stabilizer ×1
  • Vertical Stabilizer ×1
  • Cockpit cover ×1
  • Fuselage pin carbon tube L=300mm diameter=6mm ×1
  • Propeller ×1
  • Magic sticker ×1
  • Y line ×1
  • Accessories Bag 1
    • Wire rod steel wire(1.20×55mm) ×2(loaded chuck)
    • Screw (PM2.5×70mm)×2 (wing)
  • Accessories Bag 2
    • Nylon rudder angle ×4
    • Nylon rudder angle gasket ×4
    • Nylon Chuck ×2
    • Screw (PB1.7×10mm)×8 (rudder angle)
  • Manual×1


REQUIRES:
  • 4+ channel radio system(4CH radio & 6CH receiver)
  • 3S 11.1V 1300mAh 20C LiPo with T type connector
  • 3S LiPo battery charger
Write your own review
*
*
  • Bad
  • Excellent
Customers who bought this item also bought

HSDJETS GYRO V2

$35.90 $25.95